L-C1 Model #: SLE-LTEVI-CFB-PS Mercantile model in locking red metal enclosure, direct 120VAC Powered Universal full event dual path cellular &/or IP commercial fire alarm reporting from any panel brand, virtually anywhere For use as primary or backup communications on all 12V-2V control panels and FACPs that communicate using Contact ID and 4/2 Reports to any Central Station nationwide, via dial up or IP Panel-Powered, low current. No extra power supply or conduit StarLink Free for All Tradeup Incentive on POTs, new installs, old networks old radios, saves $100ea on all models Proven Reliability, Labor-Savings & Class-Leading Technology - OTA firmware upgrades, UL/NFPA Code Compliant, Preactivaed to esure communication, saving onsite labor & time Unique StarLink LTE du al diversity precision twin antennae design & Signal Boost circuitry ensure greater range & reliability, maximizing signal acquisition and null-avoidance, receiving signals simultaneously on both antennae Easy, flexible installation, activation & onli ne account management Patented Signal Boost signal amplification circuit and high-gain performance antenna for longer range and reliability nationwide CODE COMPLIANT: UL864, 10th Edition, NFPA 72 Editions 2016, 2013, 2010, 2007. UL1610, UL985, UL1023; CSFM; NYCFD; LAFD

Read more less

Model No. SLE-LTEV-FIRE L-C1 Universal full event sole path cellular & dual path cellular &/or IP commercial fire alarm reporting from any panel brand, virtually anywhere For use as primary or backup communications on all 12V-24V control panels and FACPs that communicate using Contact ID and 4/2 (such as on legacy panels) Reports to any Central Station nationwide, via dial up or IP Choice of Verizon or AT&T LTE: Communicate critical life and safety alarm reports on cyber-protected multibillion-dollar cellular nationwide networks, for maximum security & liability protection on LTE (long term evolution) for longest cellular lifespan available. Unique StarLink LTE dual diversity precision twin antennae design & Signal Boost™ circuitry ensure greater range & reliability, maximizing signal acquisition and null-avoidance, receiving signals simultaneously on both antennae Easy, flexible installation, activation & online account management Cost-saving models and plans for any code requirement. Substantial savings over monthly dedicated landline charges. Choice of plans (varies by model) – check-ins from 200 seconds, to 5-minutes to 1 hour, Verizon or AT&T® Patented Signal Boost™ signal amplification circuit and high-gain performance antenna for longer range and reliability nationwide Expanded Upgrade Program - incentive for system upgrades from old radios (all makes) and old POTs landlines, as well as new (see full details) NFPA® and UL® Code-Compliant Standard ABS or Mercantile Models in Locking Metal Enclosure

Read more less

L-H2 Wireless Extend-A-Chime works with existing doorbell Extends the range of which you can hear your existing doorbell unit. Up to 150' from the chime transmitter 32 individual privacy codes to protect against outside interference ETL Listed. FCC certified Selectable sound options are: Dong, Ding Dong, Westminster Chime, Star Spangled Banner, Hail Hail The Gangs All here, Jingle Bells, and much more Model #: STI-3353

Read more less

L-H2 Musical wireless doorbell chime Easy to install, no expensive wiring required Long range operation up to 500 feet UL/cUL Listed, FCC and IC Compliant Offers 10 selectable sounds Model #: STI-3350

Read more less

Model #: 2W-B L-C2

Read more less

L-D3 Model #: 2WT-B Item: Smoke Alarm Detection Method: Photoelectric Interconnection Capability: No Power Source: 12/24 VDC, Two-Wire Visual Alert: Red LED Diameter: 5-19/64" Height: 2" Digital Readout: No Battery Backup: No Features: Removable Detector Cover and Chamber, Built-In Remote Maintenance Signaling, Drift Compensation and Smoothing Algorithms Hush Button: No Test Button: Yes Locking Pin: No Operating Temp.: 32 Degrees to 120 Degrees F Standards: UL, CSFM Includes: Base Manufacturers Warranty Length: 3 yr.

Read more less

Model #: TL-PA4010KIT L-H3 HomePlug AV standard compliant Miniature design, smaller than most powerline adapters in the market, blends discreetly in front of any power outlet No new wires, Easy Plug and Play operation, No configuration required Patented Power-Saving Mode automatically reduces power consumption by up to 85%**  

Read more less

Model #: TEG-S24G L-B3 The 24-Port Gigabit GREENnet Switch, model TEG-S24Dg, provides high bandwidth performance, ease of use and reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency and eliminate network congestion with Gigabit speeds and a total switching capacity of 48Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter and diagnostic LEDs help with network troubleshooting. Plug and Play this sturdy metal switch for reliable high-speed network connectivity. 24 x 10/100/1000Mbps Auto-MDIX Gigabit Ethernet ports On / off power switch Features a 48Gbps forwarding capacity Internal power supply reduces clutter GREENnet technology reduces electrical power consumption when: Ethernet port is not in use Connected device is turned off Connected device is in power-saving mode Based on Ethernet cable length IEEE 802.3x Flow Control for full-duplex mode Back pressure Flow Control for half-duplex mode Store-and-Forward switching architecture with non-blocking wire-speed performance Integrated address look-up engine with a 16 K MAC address table, and 3.5 MBits RAM data buffer Operates and maximizes packet filtering and forwarding rate Jumbo Frame support up to 9216 Bytes Sturdy metal housing Diagnostic LEDs and Plug & Play support

Read more less

Model #: TPE-LG50 L-B2 Main Features Easy installation 4 x Gigabit PoE+ ports and 1 x Gigabit port Enable the DIP switch to extend PoE+ signal up to 200m (656 ft.) at 10Mbps DIP switch supports VLAN port isolation and QoS 10Gbps switching capacity 32W PoE budget Wall mountable design Sturdy metal switch Use with TRENDnet's PoE splitter to network and power non-PoE devices Lifetime Warranty

Read more less

Model #: TPE-113GI L-B2 The Gigabit Power over Ethernet Injector, model TPE-113GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices. No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds. IEEE 802.3ab Gigabit and 802.3af PoE compliant Gigabit Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328 ft.) 1 x 10/100/1000 Mbps Auto-MDIX Data In port 1 x 10/100/1000 Mbps PoE Auto-MDIX Data Out port Power port Power LED indicator Supplies power up to 15.4 Watts Easily install a PoE device where a power outlet is not available Reduce installation and network equipment costs Safeguards network devices with short circuit protection Plug and Play in remote location Light weight and compact size Wall mounting points

Read more less